Chapter 5 G-Code Control Programs; G-Code Control Program Composition - Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual

5
G-CODE CONTROL PROGRAMS
5.1

G-Code Control Program Composition

The files of the G-code program are created in text format. One G-code program is created per file. Multiple G-code programs
cannot be created in one file.
Refer to the following for the storage destination of G-code program files.
MELSEC iQ-R Motion Controller Programming Manual (Common)
G-code programs are created and written to the Motion CPU by the following methods.
G-code program operations with MT Developer2
Text files created on a personal computer can be written to/read from/verified with/deleted from the Motion CPU using MT
5
Developer2. Refer to the following for details of operation.
Help of MT Developer2
G-code program operations with GOT
G-code programs can be created on GOT and written to/read from the Motion CPU.
Refer to G-code program operation by GOT for details. (Page 236 G-Code Program Operation by GOT)
Operations to the Motion CPU with file transmission via FTP server
Text files created on a personal computer can be written to/read from the Motion CPU using the file transmission via FTP
server. Refer to the following for details of the file transmission via FTP server.
MELSEC iQ-R Motion Controller Programming Manual (Common)
5 G-CODE CONTROL PROGRAMS
91
5.1 G-Code Control Program Composition