Setup Emr Communications - Cardiac Science Atria 6100 Operating Instructions Manual

5 Communications Setup

Setup EMR Communications

5-12 Atria Electrocardiograph Operating Instructions
Network setup is required in order to send records to an EMR system or a
shared location on the network. See "Network Setup" on pg. 5-3 and
"Equipment Connections" on pg. 5-2.
Set up Web Services
Follow the instructions below to configure communication with an EMR
system such as Heartcentrix
system (version 6.1 or later).
When the Atria is configured to communicate to an EMR system:
• The Atria can send ECG records to the EMR system.
• The Atria can retrieve previous ECG records from the EMR
system.
• If the EMR system supports order-entry the Atria can
retrieve orders from the EMR system.
For more information see "Sending ECG Records to an EMR System" on
pg. 8-7 and "Retrieving ECG Records and Orders from an EMR System
with Web Services" on pg. 8-9.
NOTE: To connect to the web via a network, configure this
device for the network. Refer to the appropriate section in
Network Setup for wired ethernet, 802.11, wireless, or PPP
network setup.
CONFIGURE WEB SERVICE
1. Press [Home] and then press [Setup].
2. Select
Send Receive
3. Select
EMR Connection
4. Select
EMR Description
description of the EMR the Atria will connect to.
5. Select
Web Services URL/IP
a. For a secure server, enter
b. Enter the IP address of the server followed by a slash (/).
c. Enter the pathname followed by a slash (/).
d. Enter the server application name.
For example:
https://198.24.137.22/heartcentrixapi/userwebapi.asmx
6. Enter the
Web Services Provider ID
For more information, see your EMR administrator.
®
or the Pyramis
>
Setup EMR Connection
>
Web Services
and enter the name of the server, or a text
and enter the URL components as follows:
https://
.
®
ECG Database Management
.
otherwise, enter
http://
70-00082-01 A
.
.