Display Atria 3100 - Cardiac Science Atria 6100 Operating Instructions Manual

3 User Interface

Display Atria 3100

Figure 3-5
Atria 3100
Home Screen
3-10 Atria Electrocardiograph Operating Instructions
The Atria 3100 display has two types of screens, the
various menu screens.
Atria 3100 Home Screen
After the Atria is powered up it performs self-tests, and then displays the
screen.
Home
NOTE: Press [Home] from most menu screens to return to
the screen.
Home
A
No Name, (No Id)
60 bpm (press Sensors)
B
C
Text
Label
A Name and ID
B Sensor status or
heart rate
C Suggested next step Directs the user to the next logical step.
D Power Status
Description
Displays name and ID number for current patient.
(If there is not a current patient, this field displays as
No Name, (No Id), and pressing ECG results in
STAT ECG.)
Indicates signal quality or heart rate.
If sensors are not ok, the display indicates the
problem (Fail, Drift, or Noise) and shows which
sensor is affected.
If sensors are ok, then heart rate is indicated here.
Indicates power source and status.
AC - unit is connected to external power.
Low - low battery
Bat - unit is powered by the battery
screen and
Home
> ↵
AC
D
70-00082-01 A