Communications Options - Cardiac Science Atria 6100 Operating Instructions Manual

Communications Options

70-00082-01 A
A message displays if a new patient is started and all records
Directory Full
in the directory do not meet any of the automatic deletion criteria. A new
record is allowed only if one of the following actions is taken:
• Print at least one unprinted record
• Send at least one unsent record (Atria with communication
option only)
• Acquire at least one demographics-only record
• Delete at least one record from the directory
When the directory is full you may, however, obtain ECG printouts. These
will not be stored in the directory unless storage space is available.
Sending ECG Records to an EMR System
NOTE: Using the send feature requires the
communications option. See "Communications Setup" on
pg. 5-1.
Use the send feature to send the record to either the EMR system or
network share, based on the EMR connection setting (see "Setup EMR
Communications" on pg. 5-12).
The Atria can send records in a batch or as all new records. Follow the
instructions under "Send All New or Selected ECGs".
Alternatively, you have can review each records to send. In reviewing the
send status for each record, you have the option of placing individual
records on hold, which prevents the record from being sent (until its status
is changed again). To send selected records only, first follow the
instructions under "Select Records to Send", then continue with "Send All
New or Selected ECGs".
SEND ALL NEW OR SELECTED ECGS
1. Press [Send/Rec].
2. Press [Select].
Atria displays the status of the transmissions.
Atria Electrocardiograph Operating Instructions 8-7
Communications Options