Cardiac Science AED TRAINING SIMULATOR Operating Instructions

Battery Saver Feature
The Training Simulator powers off automatically about 30 minutes after a key
was last pressed, or after a defib discharge was last detected. This is normal
operation.
If you want to disable the battery saver feature, follow these instructions:
1. Power off the simulator.
2. Press and hold down the convert key, the press and release the
ON-OFF key. The simulator will power on.
3. Observe NSR indicator. When it blinks on and off, release the convert
key. (NSR indicator will continue to blink for approximately one second.)
The battery saver feature is now disabled.
When you power off the simulator, it will return to normal battery saver operation.
Cleaning and Sterilization
The Training Simulator may be cleaned using a sponge or cloth moistened with
water or rubbing alcohol. Do not use abrasives or solvents.
Do not steam, autoclave, or gas sterilize.
Service
The Training Simulator is warranted to be free of defects in material or
workmanship for three years from date of purchase.
If your simulator needs service, or if you have questions about its operation,
please contact your authorized Cardiac Science dealer, or Cardiac Science
Technical Support.
Cardiac Science Corporation
Waukesha, WI 53186 USA
800.426.0337 (USA)
care@cardiacscience.com
www.cardiacscience.com
The Training Simulator is intended for training and sales demo purposes only. Not for
equipment testing or verification.
262.953.3499
3
Product Description ......................................................................... 1
Controls and Indicators ................................................................... 1
Waveforms ........................................................................................ 2
Exercises .......................................................................................... 2
Battery Saver Feature ...................................................................... 3
Cleaning and Sterilization ............................................................... 3
Service .............................................................................................. 3
TRAINING SIMULATOR
OPERATING INSTRUCTIONS