Equipment Connections - Cardiac Science Atria 6100 Operating Instructions Manual

5 Communications Setup

Equipment Connections

!
Figure 5-1
Back Panel
5-2 Atria Electrocardiograph Operating Instructions
Trip hazard. Route all cables away from main work areas to minimize risk
of tripping and injury.
A
Modem
A
RJ11 port to connect telephone cable.
Network
B
RJ45 port to connect network cable.
NOTE: Do not insert the telephone cable in the Network port.
1
C
USB type A port to connect USB printer or USB wireless adapter.
USB host
D
Serial
RS-232 a 9pin serial port to connect external fax/modem or direct
connection to management system.
E Analog
Analog port to connect a monitor or other device. (Contact
output
Technical Support for approved cables).
1
The Atria conforms to the all safety and essential performance standards. Every effort has been
made to ensure the Atria will be safe when used with systems containing other equipment. When
Atria is connected to another device using a USB cable, it is important to ensure the cable will
not create excessive radio frequency emissions. To minimize this risk, a ferrite cable emissions
reducer (p/n 040-1508-00) is available as an Atria accessory (see the Accessories List for
ordering instructions) and must be used with any USB cable connected to the Atria. Follow the
installation instructions supplied with the ferrite cable emission reducer.
WARNING
D
C E
B
Key
70-00082-01 A