Change Recorder Speed, Gain, Frequency Response - Cardiac Science Atria 6100 Operating Instructions Manual

Change Recorder Speed, Gain, Frequency Response

70-00082-01 A
Acquiring a Clean Trace
• To obtain a clean trace with very little noise, ensure
is set to
Good Data
during a recording, the Atria displays a message. If
necessary, override the error message and continue
recording by pressing the [ECG] key again (for more
information, see "Wait for good data" on pg. 4-5).
NOTE: If
Wait for Good Data
then it is possible to press [ECG] prior to connecting the
patient. The Atria waits until all leads are connected and the
acquired ECG traces settle (the Atria detects good data)
before automatically starting the ECG.
To temporarily change print settings for the current patient use the
following shortcuts:
Key
[7]
Select paper speed
[8]
Selects the ECG gain
[9]
Toggles the upper ECG filter frequency response
NOTE: The updated settings remain in effect until
changed again or the Atria is restarted.
Change Recorder Speed, Gain, Frequency Response
in the menu. If there is a problem
ON ECG
is set to
Description
Atria Electrocardiograph Operating Instructions 7-5
Wait for
in the menu,
ON ECG
Selections
12.5 mm/s
25 mm/s
50 mm/s
5mm/mV
10 mm/mV
20 mm/mV
L10,C5 mm/mV
L20, C10 mm/mV
40 Hz
150 Hz