70-00082-01 A
•
Start Find Local Printers—
printers.
-
The Atria automatically selects the printer. If the
Atria finds more than one printer, use the
navigation buttons to select the printer, and then
press
[Select]
FOR NETWORKED PRINTERS ONLY:
6. Enter the
Printer IP address
7. Select
Printer Type
•
PCL3 (DeskJet)
•
Postscript
•
PCL5 (LaserJet)
Printer Connection
1. Setup the printer per manufacturer's instructions.
2. Connect printer to Atria. Refer to "Equipment Connections" on pg. 5-2.
• Ethernet network—Connect network cable to RJ45 port
(printer must also be connected to network).
• Wireless network—Connect the 802.11 USB adapter.
• USB printer—Connect to USB port.
• BlueTooth printer—Connect BlueTooth adapter to USB port.
• PPP network—For an internal modem: Connect the phone
cable. For an external modem: Connect the modem and
phone cable.
Verify Printer Operation
NOTE: In order to perform this procedure: the patient
cable must be plugged in and
is set to
Auto Print
is set to
Auto Save
• Press [Home] then press [ECG] twice.
• The Atria automatically prints the ECG on the default
printer. To configure the default printer select
>
Default Printer
This starts the process to find local
.
:
Setup
and
>
ON
Setup
ECG
.
ON
.
Atria Electrocardiograph Operating Instructions
External Printer Setup
>
>
>
ECG
Sequence
>
>
Sequence
>
Setup
Printer
5-9