Keyboard - Cardiac Science Atria 6100 Operating Instructions Manual

Keyboard

Function
Main Power
User
At the Home screen
ECG
[Stop]
Press at any
time stop printing
and return to the
Home screen
ECG Settings
(Number Keys)
70-00082-01 A
The following table describes the Atria keys.
NOTE: Not all key functions are available on every screen.
Key
[On/Stby]
[Alt] [1] [2]
+ or
[ECG]
[Auto Rhythm]
[Manual Rhythm]
[1] [2] [3] [4]
, , , or
[5] [6]
or
[7]
[8]
[9]
[0]
Description
Powers on the Atria
When the Atria is on, press this key to:
• Power off the Atria when operating on battery power.
• Go to Standby when connected to external power
(The battery continues to charge.)
Select either User 1 or User 2. See "Multiple Users" on
pg. 4-1.
Acquire and print a 12-lead ECG (a series of reports
using pre-programmed lead sequences and settings).
Print an auto rhythm report (a rhythm strip with a pre-
selected number of pages using the leads currently
selected).
Print a manual rhythm report (a continuous rhythm strip
of the leads currently selected). This report runs until the
[Stop]
key is pressed.
To select pre-programmed lead triplets. The leads are
printed on manual rhythm and auto rhythm reports.
Custom lead 1 or Custom lead 2 to select user-defined
leads.
The leads are printed on manual rhythm and auto rhythm
reports. See "Custom Lead Settings" on pg. 4-9 for setup
information.
Select paper speed (12.5, 25, or 50 mm/sec).
Select ECG gain (5 mm/mV, 10 mm/mV, 20 mm/mV; L10,
C5 mm/mV; or L20, C10 mm/mV.
Toggles the upper ECG filter frequency response (40 or
150 Hz).
For a 1 mV calibration pulse on auto or manual rhythm
printouts.
Atria Electrocardiograph Operating Instructions
Keyboard
3-3