Application Programs; Toggling Between Weight Units - Sartorius Talent Operating Instructions Manual

Application Programs

All application programs can also be used in legal metrology. Calculated weight
values are indicated by one of the following symbols displayed to the right of the
numerical value:
– Percentage
– Piece count
– Other calculated value
The application programs for calibrated balances/scales not intended for use in legal
metrology are labeled with a triangle G in the right side of the display (e.g. averaging).
Toggle between Weight Units
With this application program you can toggle the display of a weight value back and
forth between two weight units.
Configure the "Toggle weight units" application in the operating menu:
See "Configuring the Balance/Scale." Menu code: 2.1. 2
Menu code
1. 7. 1 3. 1. 1
1. 7. 2 3. 1. 2
1. 7. 3 3. 1. 3
1. 7. 4 3. 1. 4
1. 7. 13 3. 1. 13
ο
= Factory setting
Function
§ To toggle the display between the 1st and 2nd weight units:
Press the v key
1)
= only for models with readability > 10 mg
2)
= only for models with readability < 1 mg
10
= %
= pcs
= o
Unit
Grams (o)
on model GD603
Grams
1)
Kilograms
Carats
2)
Milligrams
Conversion factor
1.000
1.000
0.001
5.000
1.000.000
Abbr. on
printout
o
g
kg
ct
mg