Factory Reset; Reset Via Lcd - Grandstream Networks GVC3200 Administration Manual

http://arttel.ru
Users could reset GVC3200/GVC3202 to factory settings via the following ways: Reset via local GUI, via
Web page, via the reset hole on the back panel of GVC3200/GVC3202. Factory reset will delete
configuration info and syslog info.
--------------------------------------------------------------------------------------------------------------------------------------------
Warning:
1. Factory reset will erase all GVC3200/GVC3202 configuration information. Please back up all settings
or print useful information before making the following operations. If users lose all parameters or
records, Grandstream will not take responsibility for the damage or loss.
2. After factory reset, the remote control will not be paired to GVC3200/GVC3202 anymore. Please go to
GVC3200/GVC3202 LCD settings->Network->Bluetooth, select the menu buttons on the upper right
and click "Search New Devices". GVC3200/GVC3202 remote control "GS-RCU" with last 4 digits of
the remote control MAC address will show in the available device list. Select it to start pairing process
on GVC3200/GVC3202, immediately followed by pressing OK+5 keys on the remote control at the
same time. The remote control will be paired and connected to GVC3200/GVC3202 again.
--------------------------------------------------------------------------------------------------------------------------------------------

RESET VIA LCD

Go to GVC3200/GVC3202 LCD idle screen->Settings->Maintenance->Factory Reset, click on the "Reset"
button to bring up the prompt box as shown below. Click "OK" to reboot the device and restore factory
settings.
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202

FACTORY RESET

GVC3200/GVC3202 Administration Guide Page 69 of 71