Power Manager; Site Name - Grandstream Networks GVC3200 Administration Manual

http://arttel.ru
Set specific time zone for the device. If DHCP Option 2 is activated for web UI configuration, the
device will skip this setting and directly use the time zone sent by DHCP Option 2.

Set Time
Manually set the current time for the device, the time configured manually will be erased if the device
is rebooted.

Use 24-hour Format
Check/uncheck to display the time using 24-hour time format or not. For example, in 24-hour format,
13:00 will be displayed instead of 1:00 pm

Select Date Format
Select the format of year, month and day for the date to be displayed. For example, 12/31/2015,
31/12/2015, 2015/12/31.

POWER MANAGER


Enter Sleep Mode
Select the interval before the device enters sleep mode. If the device is in idle during this interval, it
will enter sleep mode. Once the device enters sleep mode, the display monitor will not have any
display and web UI of the device is not available. The available intervals are 1 minute, 5 minutes, 10
minutes, 15 minutes, 30 minutes and 60 minutes. The default setting is 30 minutes. To wake up the
device from sleep mode, press the POWER key on the remote control.

SITE NAME

The configured site name will be displayed on call screen.

Transparency
Select the background transparency for the site name display. The user can select Opaque, 5%, 10%,
15% or 20%. The default setting is "Opaque".

Site Name
Configure the site name to be imposed on the video of local video.

Display Position
Configure the site name's position to be at the Upper Left Corner, Upper Right Corner, Lower Left
Corner or Lower Right Corner on the video. The default setting is "Upper Left Corner".

Display Duration
Configure the duration to display the site name. The user can select Do No Display, 1 Minute, 5
Minute, 10 Minutes or Always. The default setting is "Always".

Horizontal Offset
Slide left or right to adjust the horizontal position from 0 to 96 for the site to display on the screen. The
default setting is 0.
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
GVC3200/GVC3202 Administration Guide Page 18 of 71