Grandstream Networks GVC3200 Administration Manual page 61

http://arttel.ru
Debug
Capture Trace
Trace List
View Trace
Syslog
Syslog Server
Address
Syslog Level
Send SIP Log
Ping
Target Host
Traceroute
Target Host
Developer Mode
Developer Mode
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
Press the START button to start capturing a trace, and press STOP to stop the
capture process. The default setting is close.
Selects the existing capture file. Press the DELETE button on the right to delete the
file.
Click the LIST button to view the traces, which are listed according to time when the
traces were captured. Click the trace name to download it to PC. The captures files
are saved in FileManager->SD Card->ppp file.
The URL/IP address for the syslog server.
Selects the level of logging for syslog. The default setting is "None". There are 4
levels: DEBUG, INFO, and WARNING AND ERROR. Syslog messages are sent
based on the following events:
1. Product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. Sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. Inbound and outbound calls (INFO level)
6. Registration status change (INFO level)
7. Negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. Memory exception (ERROR level)
If set to "Yes", the device will send SIP log in the syslog messages. The default
setting is "No".
Enter the target host and press "Start" to ping the host address. This can be used to
test the reachability of a host in the network and measure the round-trip time for
messages sent from the device to the destination host.
Fill in target host or IP address and click START to view details displayed below. This
will output a list of traversed routers and measure transit delays of packets across
the network.
If turned on, ADB (Android Debug Bridge) function will be enabled on the device.
The default setting is "Disabled". This option is usually used for development
purpose instead of normal usage.
GVC3200/GVC3202 Administration Guide Page 60 of 71