Vga In; Status; Account; Peripheral - Grandstream Networks GVC3200 Administration Manual

http://arttel.ru

VGA IN


Image Shift
After VGA input is plugged in and VGA input is displayed on the HDMI output device, if offset
occurs,

VGA In
Configure the offset location of VGA input. When set the image shift to "Horizontal Offset",
configure the horizontal offset of VGA input here; when set the image shift to "Vertical Offset",
configure the vertical offset of VGA input here. The parameter range is from -60 to 60. The
default setting is 0.

Sampling Phase
After VGA input is plugged in and VGA input is displayed on the HDMI output device, if color
distortion occurs, you can manually adjust sampling phase from 0 to 32. Usually the same color
presented on VGA display device and HDMI display device has obvious difference. The default
setting is 16.

STATUS

The Status page lists GVC3200/GVC3202's account status, peripheral status, network status, system info
status, remote control status.

ACCOUNT


Account
Account name.

Number
SIP User ID for the account (if applicable).

Status
Display registration status for the SIP account. There are two statuses: Registered (in green),
Unregistered (in grey).

PERIPHERAL


Zoom
Display the current camera zoom, for example 12x Optical Zoom for GVC3200, or 9x Optical Zoom
for GVC3202.

VGA In
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
you can adjust it manually by selecting Horizontal Offset or Vertical Offset.
GVC3200/GVC3202 Administration Guide Page 29 of 71