Grandstream Networks GVC3200 Administration Manual page 57

http://arttel.ru
Complete Upgrade
Upload Firmware
File to Update
Firmware Upgrade
Mode
Firmware
HTTP/HTTPS
Username
Firmware
HTTP/HTTPS
Password
Firmware Server
Path
Firmware File
Prefix
Firmware Postfix
Config Upgrade
Mode
Config
HTTP/HTTPS
Username
Config
HTTP/HTTPS
Password
Config Server Path
Config File Prefix
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202

When set to "Yes", the device will keep the user data and replace all other files.

When set to "No", the device will compare the firmware file and only replace the
part that has update. The default setting is "No".
For example: if the device can't fully boot-up but the user still login web UI, please
enable this feature to recover the system.
Manually upload firmware file from PC to the device system directly.
It is used to set the upgrading protocol for the device to retrieve firmware file. It can
be selected from TFTP, HTTP and HTTPS. The default setting is HTTP.
It is used to type the user name for the HTTP/HTTPS server authentication for
firmware server.
It is used to type the password for the HTTP/HTTPS server authentication for
firmware server.
It is used to define the server path for upgrading the firmware. It can be different
from the Config Server Path.
It is used to set the prefix characters for the firmware files. If it is configured, only the
firmware with the matching encrypted prefix will be downloaded and flashed into the
device system. It allows the ITSP to lock firmware updates.
It is used to set the post characters for the firmware files. If it is configured, only the
firmware with the matching encrypted postfix will be downloaded and flashed into the
device system. It allows the ITSP to lock firmware updates.
It is used to set the provisioning protocol for the device to retrieve the config file. It
can be selected from TFTP, HTTP and HTTPS. The default setting is HTTP.
It is used to type the user name for the HTTP/HTTPS server authentication for config
server.
It is used to type the password for the HTTP/HTTPS server authentication for config
server.
It is used to define the server path for provisioning the configuration file. It can be
different from the Firmware Server Path.
It is used to set the prefix characters for the configuration files. If it is configured, only
the firmware with the matching encrypted prefix will be downloaded and flashed into
the device system.
GVC3200/GVC3202 Administration Guide Page 56 of 71