Grandstream Networks GVC3200 Administration Manual page 49

http://arttel.ru
Enable Call
Features
Ring Timeout (s)
Transfer on 3 way
conference
Hangup
Use # as Dial Key
Conference-URI
Upload Local MOH
Audio File
Enable Local MOH
Account Ring Tone
Call Forwarding
Mode
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
If set to "Yes", call features (including call forwarding, DND and etc) will be
supported locally instead of using the feature code supported on SIP server/proxy.
For example, if *72+number is dialed, the incoming calls will be forward to this
number unconditionally. The default setting is "No". Refer to the chapter Call
Features for more details in the GVC3200/GVC3202 User Guide.
It is used to define the expiration timer (in seconds) for the rings with no answer. The
default setting is 60.
It is to set if the device will end the three-way conference hosted on it if it hangs up.
If set to "Yes", the conference will be transferred from hosted party, thus other
parties can continue the conference without interruption. The default setting is
unchecked.
It is used to set the device whether to use the "#" key as the "Send" key. If set to
"Yes", if the end user taps the "#" key on the remote control, the device will send out
the typed digits. If set to "No", the "#" key is included as part of the dialing string and
please make sure the dial plan is properly configured to allow dialing # out. The
default setting is "Yes".
It is used to configure the network based conference URI (Broadsoft Standard). If it
is configured, end user needs to select MORE on the bottom menu in call interface
and click on "N-way Conf" during the conference to transfer the host to the remote
media server.
It is used to load the MOH (Music on Hold) file to the device. Click on "Browse"
button to upload the music file from local PC. The MOH audio file has to be in .wav
or .mp3 format.
Note:
Please be patient while the audio file is being uploaded. It could take more than 3
minutes to finish the uploading especially the file size is large. The button will show
as "Processing" during the uploading. Once done, it will show as "Browse" again.
Click on "Save" on the bottom of the web page and "Apply" on the top of the web
page to save the change.
If set to "Yes", the local MOH will be enabled. Users need to upload local MOH audio
file. Once enabled, users could play the file when holding the call. The default setting
is "No".
It is used to configure the ringtone for the account. Users can set ringtones from the
dropdown list. User can also import customized ringtone from LCD Setting menu.
The customized ringtone file name will also be showed up in the dropdown list that
allows user to select.
It is to set the Call Forwarding feature for this account.

None: Disable Call Forward

Unconditional: Forward all calls to particular number

Time based: Set a time range to forward calls

Others: Customize the call forwarding rules
GVC3200/GVC3202 Administration Guide Page 48 of 71