http://arttel.ru
Use NAT IP
SETTINGS/SECURITY SETTINGS
Parameters
Web/SSH Access
Disable SSH
Access Method
Port
Admin Password
User Password
SIP
SIP TLS Certificate
SIP TLS Private
Key
SIP TLS Private
Key Password
MAINTENANCE
Maintenance section lists Upgrade, Recording, Time & Language, Troubleshooting and Reboot.
MAINTENANCE/UPGRADE
Parameters
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
It is used to configure the IP address for the Contact header and Connection
Information in the SIP/SDP message. It should ONLY be used if it's required by your
ITSP. The default setting is keep the box blank.
Descriptions
It is used to set if the device will block the SSH port. If it is set to "Yes", the device
will block any SSH access to it. The default setting is "No".
It is used to set which protocol will be used to access the device's Web GUI. It can
be selected from HTTP and HTTPS. The default setting is HTTP.
It is used to set which port will be used to access the device's Web GUI. By default,
if HTTP is selected, the port number will be 80; if HTTPS is selected, the port
number will be 443.
It is used to set the administrator password for Web GUI. It is case sensitive with a
maximum length of 32 characters. The default password is "admin".
It is used to set the user password for Web GUI. It is case sensitive with a maximum
length of 32 characters. The default password is "123".
Defines the SSL certificate used for SIP over TLS to access particular websites. The
device supports SIP over TLS encryption, realizing it via the built-in private key and
SSL certificate. The SSL certificate the user specifies for TLS encryption should be
X.509 format.
Defines the SSL private key used for SIP over TLS. The SSL private key the user
specified for TLS encryption should be X.509 format.
Defines the SSL private key password used for SIP over TLS.
Descriptions
GVC3200/GVC3202 Administration Guide
Page 55 of 71