Reset Via Web Ui; Reset Via Reset Hole; Figure 8: Factory Reset Via Lcd; Figure 9: Web Ui - Factory Reset - Grandstream Networks GVC3200 Administration Manual

http://arttel.ru

RESET VIA WEB UI

1. Go to GVC3200/GVC3202 Web GUI->Upgrade and the "Factory Reset" option is on the bottom of
the page.
2. Click the "Reset" button to bring up the prompt box as shown below. Click "OK" to reboot the device,
and restore factory settings.

RESET VIA RESET HOLE

There is a Reset hole on the back panel of GVC3200/GVC3202, use a small pin to hold against the Reset
hole for more than 10 seconds to restore factory settings.
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202

Figure 8: Factory Reset via LCD

Figure 9: Web UI - Factory Reset

Figure 10: Web UI - Factory Reset Confirmation

GVC3200/GVC3202 Administration Guide Page 70 of 71