Maintenance/Recording; Maintenance/Time & Language - Grandstream Networks GVC3200 Administration Manual

http://arttel.ru
Advanced Settings
Validate Server
Certificate
mDNS Override
Server
DHCP Option 66
Override Server
3CX Auto
Provision
Disable SIP
NOTIFY
Authentication
Factory Reset

MAINTENANCE/RECORDING

Users could find recording files on this web page, download the file to PC to listen to or delete the files.
The recording files are stored in external SD card plugged into the GVC3200/GVC3202.
MAINTENANCE/TIME & LANGUAGE
Parameters
Assign NTP Server
Address 1
Assign NTP Server
Address 2
Set Date
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
It is used to configure whether to validate the server certificate when download the
firmware/config file. If set to "Yes", the device will download the firmware/config file
only from the legitimate server. The default setting is "No".
It is used to set if the device will broadcast the Multicast DNS (mDNS) message
during booting up to allow itself to be discovered and be configured by the SIP
platform. If it is set to "User Type A', the device will broadcast the MDNS message
"A_grandstream-cfg.local"; if it is set to "Use Type SRV", the MDNS message will be
"SRV_grandstream-cfg.local". The default setting is "Use Type A".
It is used to set if the device allows the DHCP offer message to override the Config
Server Path via the Option 66 header. The device supports both TFTP and HTTP
method via Option 66. The default setting is "Yes".
It is used to set if the device will broadcast the SIP SUBSCRIBE message during
booting up to allow itself to be discovered and be configured by the SIP platform.
The default setting is "Yes".
If set to "Yes", the device will not challenge NOTIFY with 401 authentication. The
default setting is "No".
It is used to reset the device to the default factory setting mode. If the "Clear the SD
card" is checked, the SD card storage mounted to the device will be format as well.
Descriptions
It is used to define the URL or IP address of the NTP server 1. The device may
obtain t
he current date and time information from the server. The default setting is
"us.pool.ntp.org".
It is used to define the URL or IP address of the NTP server 2. The default setting is
empty.
Manually set the current date for device.
GVC3200/GVC3202 Administration Guide Page 58 of 71