Factory Reset; Reboot; Network; Bluetooth - Grandstream Networks GVC3200 Administration Manual

http://arttel.ru

Traceroute
Fill in target host or IP address and click START to view trace route details.

Syslog
Configure Syslog level and server address. By default syslog is turned off.

Developer Mode
Configure whether to enable developer mode. If turned on, ADB (Android Debug Bridge) function will
be enabled on the device. The default setting is "Disabled".

FACTORY RESET


Factory Reset
Restore to the factory settings. If check the "Clear the SD card", the GVC3200/GVC3202 will also
format the internal SD card storage in the device during factory resetting.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please backup the important files or settings before factory resetting.
-------------------------------------------------------------------------------------------------------------------- ------------------------

REBOOT


Reboot
Click the REBOOT button to reboot device.

NETWORK

Users can configure Bluetooth, Ethernet, Wi-Fi (GVC3202 only), Proxy, VPN, VLAN, LLDP and 802.1x
under Network settings here. Some of the configurations here such as Bluetooth, Wi-Fi (GVC3200 only)
and VPN settings are not available in web UI.

BLUETOOTH


Paired Devices
Display paired devices such as Bluetooth remote control, Android mobile phone, Bluetooth speaker
and etc.
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
GVC3200/GVC3202 Administration Guide Page 22 of 71