Firmware Update; No Local Firmware Server - Grandstream Networks GVC3200 Administration Manual

http://arttel.ru
GVC3200/GVC3202 supports software upgrade via the following methods:

Manually upload firmware file to upgrade (for applicable firmware versions only).

Upgrade via TFTP firmware server

Upgrade via HTTP/HTTPS firmware server
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
1. Please do not power cycle the device during firmware upgrading process. This might corrupt firmware
image, and cause the unit to malfunction.
2. Please make sure the firmware file in the firmware server is unzipped and the firmware file name is
correct. Firmware file name other than the provided default file name might cause firmware upgrading
failure.
3. Please go to Grandstream website
latest firmware information.
4. For GVC3200 using firmware version 1.0.1.5 or below, please upgrade to firmware 1.0.1.12 first
before upgrading to 1.0.1.48. Here is the firmware server path for 1.0.1.12 via HTTP:
firmware.grandstream.com/gvc3200_1_0_1_12
Once the device is upgraded 1.0.1.12 or higher versions, it is recommended to configure the firmware
server path to
upgrade to 1.0.1.48.
---------------------------------------------------------------------------------------------------------------------- ----------------------

NO LOCAL FIRMWARE SERVER

For users that would like to use remote upgrading without a local TFTP server, Grandstream offers a NAT-
friendly HTTP server. This allows users to download the latest software upgrades for their Grandstream
devices via this server. Please refer to the webpage: http://www.grandstream.com/support/firmware.
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202

FIRMWARE UPDATE

www.grandstream.com/support/firmware
firmware.grandstream.com
GVC3200/GVC3202 Administration Guide
to upgrade via HTTP which has all necessary files to
for the release note and
Page 65 of 71