Grandstream Networks GVC3200 Administration Manual page 58

http://arttel.ru
Config File Postfix
XML Config File
Password
Authenticate Conf
File
Download Device
Configuration
Always send HTTP
Basic
Authentication
Information
Automatic Upgrade
Automatic
Upgrade
Hour of the Day
(0-23)
Day of the Week
(0-6)
Firmware Upgrade
and Provisioning
Auto Reboot to
Upgrade Without
Prompt
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
It is used to set the prefix characters for the configuration files. If it is configured, only
the firmware with the matching encrypted postfix will be downloaded and flashed into
the device system.
The password for encrypting the XML configuration file using OpenSSL. The
password is to decrypt the XML configuration file if it is encrypted via OpenSSL.
It is used to set if the device authenticates the configuration file before applying it. If
it set to "Yes", the configuration file must include value P1 with device's
administration password. If it is missed or does not match the password, the device
will not apply the configuration in the config file. The default setting is "No".
It is used to download the device configuration file in text format. The config file
includes all the P value parameters for device's current settings except password for
security purpose.
It is used to set if the device includes the credential information in the HTTP/HTTPS
request messages to download the cfg.xml file. If it is set to "Yes ", the credential
information will always be included in the HTTP/HTTPS messages regardless the
server's challenge. The default setting is "No".
Enables automatic upgrade and provisioning. The default setting is "Check Every
Day". If set to "Check Every Day", "Check Every Week" or "Check at a Period Time",
fill in time interval below for upgrade. The shortest time interval is 60 minutes. If set
to "No", only upgrade when reboot the device.
Defines the hour of the day (0-23) to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. This option is available when "Automatic
Upgrade" is set to "Check Every Day ". The default setting is "1".
Defines the day of the week to check the HTTP/TFTP server for firmware upgrades
or configuration files changes. The default setting is "1".
It is used to define the rules for automatic upgrade on the device.
It can be selected from the following:
 Always Check at bootup
 Always Check at bootup, when F/W pre/suffix changes,
 Skip the Firmware Check.
The default setting is "Always Check at bootup".
It is used to set if the device will pop up a notification message before upgrading
new firmware. If set to "Yes", the device will automatically start upgrading after
downloading the firmware file. Otherwise, users would need to confirm in the
prompted message on the LCD screen to start upgrading process. The default
setting is "Yes".
GVC3200/GVC3202 Administration Guide Page 57 of 71