Settings/Network Settings - Grandstream Networks GVC3200 Administration Manual

Video conference system for android
Hide thumbs Also See for GVC3200:
Table of Contents

Advertisement

http://arttel.ru
Match Incoming
Caller ID
Distinctive Ring
Tone

SETTINGS/NETWORK SETTINGS

Network Settings lists Basic Settings, 802.1X, QoS, Proxy and Advanced Settings.
Parameters
Basic Settings
Address Type
Host name
(Option 12)
Firmware Version 1.0.1.48
http://arttel.ru/shop/videokonferentsii/grandstream-gvc3202
It is used to specify the rules for the incoming calls. If the incoming caller ID or Alert
Info matches the number, pattern or Alert Info text rules, the device will play the
selected distinctive ringtone.
The rule policy:
Specific caller ID number. For example, 8321123
A defined pattern with certain length using x and + to specify, where x could be
any digit from 0 to 9. Samples:
xx+: at least 2-digit number
xx: only 2-digit number
[345]xx: 3-digit number with the leading digit of 3, 4 or 5
[6-9]xx: 3-digit number with the leading digit from 6 to 9
Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and select
the custom ring tone mapped to it. The custom ring tone will be used if the
device receives SIP INVITE with Alert-Info header in the following format:
Alert-Info: <http://127.0.0.1>; info=priority
It is used to select the distinctive ring tone if the incoming caller ID matched the
specified Matching Incoming Caller ID rule. If so, the device will play the selected
ringtone.
Descriptions
Allows users to configure the appropriate network settings on the device. Users
could select "DHCP", "Static IP" or "PPPoE". By default, it is set to "DHCP".
DHCP: Obtain the IP address via one DHCP server in the LAN. ALL domain
values about static IP/PPPoE are unavailable (although some domain values
have been saved in the flash.)
PPPoE: Configures PPPoE account/password. Obtain the IP address from the
PPPoE server via dialing.
Static IP: Manually configures IP Address, Subnet Mask, Default Router's IP
Address, DNS Server 1 and DNS Server 2.
It is used to configure the name of the client in the DHCP request. It is optional but
may be required by some Internet Service Providers.
GVC3200/GVC3202 Administration Guide
Page 49 of 71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gvc3202

Table of Contents