Input Source Connection; Introduction; Removing And Inserting An Input Module - Barco XLM H25 Owner's Manual

3. Connections

3.3 Input source connection

Overview
•

Introduction

•

Removing and Inserting an input module

• DVI input module
• SDI input module
• HDSDI input module
• YUV / RG(s)B input module
• RGB analog input module
• CVBS / S-VID input module
• Dummy input module
3.3.1 Introduction
Overview
The source input layer (L2 on image 3-3) consists out of different input modules. Any combination is possible. Within the next topics
each input module will be discussed.
If no input module is inserted, the slot must be filled up by dummy input.
3.3.2 Removing and Inserting an input module
How to remove an input module?
1. Push on the release button underneath the input module (1) which you want to remove. At the same time pull out the input
module by the grip handle (2). (image 3-4)
Image 3-4
Module insertion
26
GREEN : OPERATIONAL
RED : STAND-BY
IR
OK
PUSH
2 1
3
2
1
9 0
STANDBY EXIT
7 8
ENTER
5 6
TEXT PAUSE
3 4
SHARPN TINT BRIGHTN
1 2
PHASE COLOR
CONTRAST
PUSH
2 1
3
R5976690 XLM H25 03/09/2004