Appendix 2 - Mpeg-4 Video Plug-In Installation - Optelecom-nkf Siqura C-54 E-MC User Manual

Appendix 2: MPEG-4 Video Plugin installation
APPENDIX 2 – MPEG-4 VIDEO PLUG-IN INSTALLATION
The C-54 E Video Motion Detection web page has a live video overlay on which masks can be
drawn. To use the overlay, the MPEG-4 Video Plug-in ActiveX control must be installed from
your C-54 E CD. Check the Optelecom-NKF website for the most recent version.
To install the Video Plug-in
1. In the root folder of your CD, double-click the Showroom.exe file.
2. On the CD menu, click
A wizard will guide you through the installation.
3. Accept the terms of the License Agreement.
4. Check the boxes for components you wish to install (figure A2.1).
5. Choose a Start menu folder and complete the wizard.
The next step is to configure Internet Explorer security settings to permit the use of ActiveX
controls for the C-54 E web pages. This is done by adding these pages to the Trusted Sites.
To configure Internet Explorer
1. From the Internet Explorer Tools menu, select
open
2. On the Security tab, click to select the
3. Clear the
4. In the upper text box, type the IP address of the C-54 E, or enter an IP range if you
need to configure multiple modules (see figure A2.2).
5. Click
For IE6, the above actions will suffice. Shut down and restart Internet Explorer to ensure
that the new settings will take effect.
Install
Figure A2.1 Selecting MPEG-4 Product Utilities components to be installed
).
Internet Options
Require server verification
and then click
Add, OK
.
Internet Options
Trusted sites
check box.
(2x) (IE6) or (IE7).
Close
- 85 -
(or in the Control Panel,
icon, and then click
Sites
.