Ptz - Optelecom-nkf Siqura C-54 E-MC User Manual

4-channel digital mpeg-2/4 & mjpeg video server with vmd and data
Table of Contents

Advertisement

Using the internal web pages

7.9. PTZ

The first time you access the PTZ web page after opening your web browser, you are asked
to authenticate. Next, a security alert will display. Using the PTZ page requires Java Runtime
Environment 1.6 or higher. The Optelecom-NKF application does not give rise to any security
risks. You can run it safely.
On the PTZ page you can enable PTZ control for a PTZ camera connected to an analog video
input. In addition, you can upload and manage PTZ drivers, and configure data settings.
To enable PTZ control
1.
In the Camera # settings section, specify the Camera ID/address.
2.
From the PTZ driver list in the Camera 1 settings section, select the protocol supported
by the PTZ camera you wish to control.
The selected protocol is set for all cameras.
3.
Click
You can now control the camera from the Live Video page. Use the PTZ panel on the
right of the PTZ camera preview in Maximized mode.
.
SAVE
Figure 7.54 PTZ page
- 68 -

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Siqura C-54 E-MC and is the answer not in the manual?

Table of Contents