Viewing Calibration Reports - Sartorius PMA.Vision Operating Instruction

Scale Calibration/Adjustment
Report
Date and time: 2016-06-24 09:16
Calibration function: External calibration
Start calibration: Start: manually
Calibration weight: Set 2000.0 g
Calibration deviation: Dev 0.0 g
Adjustment function: External adjustment
Adjustment deviation: Dev 0.0 g
Calibration/Adjustment
Weighing system adjustment
Calibration report
Calibration report
2016-06-22: 2 Protocols
VIS1X
40 Operating Instructions
A report appears on the display.
y
The report indicates the deviation identified during calibration. The report also gives
the result of the adjustment process.
Select m in order to close the report window.
t
The scale is now calibrated and adjusted.
y
Information on potential errors can be found in Chapter "11 Faults", page 49.
8.2

Viewing Calibration Reports

Select [Calibration report] (1) in the [Calibration/adjustment] window.
t
The [Calibration report] window opens.
y
1
The current reports are listed in the [Calibration report] window.
Select the relevant entry to display the report.
t