Sartorius PMA.Vision Operating Instruction page 33

Parameter Setting values
Ambient conditions Stable
Unstable
Use Weighing
Filling weight
Stability signal Extremely precise
Precise
Fast
Automatic zero On
Off
Unit/accuracy
Unit g
p
Accuracy All digits
Polyrange
Display brightness Bright
Medium
Eco Mode
Menu access Full
Read only
Some selection options are not available for verified models.
Explanation
Stable environment.
The effects of operation in unfavorable ambient conditions such as drafts or
vibration can be filtered out by adapting measuring time for the weighed values.
The display responds very quickly to large load changes. The display responds more
slowly to small changes in weight (in the digit range). This setting is suitable for
normal weighing.
The display responds quickly to small changes in weight, making it faster and more
accurate for additional dosing and container filling functions.
The scale stability is displayed as soon as the weighing result is constant within a
defined range. Until stability is reached, the measured value is shown in gray on
the display and only turns black once the scale is deemed stable.
Changes of a set fraction of scale intervals per second starting from the display
zero point are automatically zeroed.
Display in grams.
Display in parts per pound.
Display with all available points.
Number of points changes dynamically.
Sets the display brightness to 100%.
Sets the display brightness to 60%.
The brightness is reduced after 2 min. of inactivity.
Full access to the menu.
Access to the menu is protected with a user password.
System Settings
VIS1X
Operating Instructions 33