Scrolling In The Display; Entering Figures On The Number Pad - Sartorius PMA.Vision Operating Instruction

Operating Concept
Settings
Language
Date and time
Device information
Application
Calibration/Adjustment
Settings
Calibration/Adjustment
Weighing
Ethernet
Display brightness
More settings
0.55
Amount
l
1 2 3
4 5 6
7 8 9
0 .
VIS1X
16 Operating Instructions
Symbol Name
No.
Setup
4
Sort
5
On/off
6
4.3

Scrolling in the Display

If more than one entry is available, you can scroll up and down through the display
to select the desired entry.
To scroll, place your finger on the display and drag it slowly either up or down.
t
The entries on the display move in the corresponding direction.
y
While you are scrolling, a gray scroll bar appears on the right of the display,
indicating where you are in the list of options.
Tap the desired entry to select it.
t
4.4

Entering Figures on the Number Pad

You can enter numeric values in the formulas or system settings. A number pad
appears on the display, which is always used in the same way.
To enter numbers, select the desired numbers one after the other.
t
The entered numbers appear at the top of the display.
y
To correct the last entered number, select
t
The number is deleted. Then enter the correct number.
y
C
To clear the entire entered value, select C.
t
To confirm the entry, select
t
To cancel the entry, select
t
Description
Pressing calls up the setup menu. System settings
can be changed there.
Pressing calls up the sorting function (sorting of
available formulas).
− Pressing for longer than 3 seconds switches the
scale off (standby).
− Pressing briefly will switch the scale on again.
p
.
.
l
m .