Operating Concept; Operating And Display Elements In The Operating Display - Sartorius PMA.Vision Operating Instruction

Operating Concept

VIS1X
14 Operating Instructions
4 Operating Concept
4.1

Operating and Display Elements in the Operating Display

NOTICE
Sharp or pointed instruments (such as ballpoint pens) can damage the
device!
The operating display should only be operated by lightly pressing it using the tips of
your fingers.
Max. 7500 g
G
12
+
11
10
9
Fig. 1: Operating and Display Elements in the Operating Display
No. Function
1 Toolbar showing currently available buttons
− Zeroing/taring
2 Metrology line (additional info for minimum capacity Min and the
verification scale interval e appear on verified scales)
3 In verified mode for devices where e does not equal d: The frame indicates
a scale interval
4 Current weight or value measured
5 Warning symbol to indicate calculated values, negative gross values
6 Unit and stability indicator; set weight unit and display accuracy
7 Run application, such as saving the weight value of a component
8 Settings for the selected application
9 Menu key: Switch to menu or formula selection
10 Bar graph: scaled display showing capacity usage (in percent)
11 Plus (or minus) sign of the weight
12 Display value ID, e.g., "G" for gross value, "Net" for net value; switch display
value for application, such as net value, total value, weight value, or
calculated value
0
Min 5 g e=1 g d=0.1 g
4987.6
Factor
1.00
8
1
2
3
4
5
g
6
START
7