Upnp; Snmp (For Advanced Users Only); Bonjour (Unsupported); Multicast (For Advanced Users Only) - FLIR DND13TL2 Instruction Manual

5 Setup
7. Under Authentication, select SSL or TLS if the server uses encryption.
8. Enter a title for the email.
9. Enter the email address of the mail receiver.
10. Under Interval, select the interval for sending email alerts. The system will only send
email alerts after this interval has passed.
11. Check Health Mail to enable the camera to send health alerts. If you enable health
alerts, enter the interval in seconds under Update Period.
12. Click Email Test to send a test email using the settings you have entered.
13. Click Save to save changes.

5.2.7 UPnP

UPnP allows you to map port numbers between the LAN and the Internet. Depending on
your router version, you may need to disable UPnP function.

5.2.8 SNMP (For Advanced Users Only)

5.2.9 Bonjour (Unsupported)

5.2.10 Multicast (For Advanced Users Only)

5.2.11 802.1x (For Advanced Users Only)

5.2.12 QoS (For Advanced Users Only)

5.2.13 RTSP Streaming (Advanced — Select Network Cameras only)
RTSP streaming allows you to stream video from a specific camera using a web address.
It is an optional connectivity method used by 3rd party software applications.
NOTE
The instructions in this section are using VLC Media Player. VLC Media Player is a free software provided
at www.videolan.org. FLIR cannot provide support for VLC Media Player or any other 3rd party software.
Please contact the software vendor for technical support related to 3rd party software applications.
To connect to the video stream using VLC Media Player:
1. Open VLC Media Player.
#LX400073; r.46243/46243; en-US
30