Sd Card - FLIR DND13TL2 Instruction Manual

5 Setup

5.4.4 SD Card

Use the SD Card tab to configure warning messages for SD card errors.
5.4.4.1 No SD Card
A No SD Card error occurs if recording is set in the camera, but there is no SD / microSD
card installed.
NOTE
The No SD Card warning is only available on cameras that support SD / microSD cards. Check the tech-
nical specifications for your camera.
To configure No SD Card errors:
1. Select No SD Card from the Event Type drop-down list.
2. Check Enable to enable No SD Card errors.
3. Check Relay-out to trigger an alarm out device when No SD Card errors occur. Under
Alarm Delay, enter the number of seconds before the alarm out device will be
activated.
NOTE
Relay-out is only available if your camera supports alarm output. Check the technical specifications
for your camera.
4. Check Send Email to send an email alert when No SD Card errors occur.
5.4.4.2 SD Card Error
An SD Card Error occurs if an error occurs while recording to the SD / microSD card (for
example, if the card is damaged or is using the wrong file system).
NOTE
The SD Card Error warning is only available on cameras that support SD / microSD cards. Check the
technical specifications for your camera.
To configure SD Card Errors:
1. Select SD Card Error from the Event Type drop-down list.
2. Check Enable to enable SD Card Errors.
3. Check Relay-out to trigger an alarm out device when SD Card Errors occur. Under
Alarm Delay, enter the number of seconds before the alarm out device will be
activated.
NOTE
Relay-out is only available if your camera supports alarm output. Check the technical specifications
for your camera.
4. Check Send Email to send an email alert when SD Card Errors occur.
5. Click Save to save changes.
#LX400073; r.46243/46243; en-US
43