FLIR DND13TL2 Instruction Manual page 24

5 Setup
White Balance
• Auto: Automatic white balance.
• Natural: White balance mode optimized for settings without artificial lighting.
• Street lamp: White balance mode optimized for night time, outdoor settings.
• Outdoor: White balance mode optimized for outdoor settings with natural and artifi-
cial lighting.
• Manual: Manual white balance. Use the sliders to configure the Red and Blue
control.
Day & Night
• Auto: Camera will automatically change between day and night mode based on the
lighting (recommended).
• Color: Camera will be in day mode at all times.
NOTE
Select FLIR network cameras support Color Night Vision™ (CNV). Cameras with CNV have spe-
cial low-light image sensors which allow the camera to continue providing a color image in low-
light conditions. Cameras enabled with CNV will switch to Black & White mode when ambient light
is inadequate. To keep CNV on, select Color mode. Ensure adequate ambient lighting is present
if using Color mode in low light conditions, it is recommended to review your camera footage to
ensure your recordings are clear. For more information about CNV, visit
http://www.flir.com/security/pro
• Black & White: Camera will be in black and white at all times.
• D&N Sensitivity: When day & night mode is set to Auto, the sensitivity level indi-
cates the threshold at which the camera switches between day and night mode. Se-
lect Low, Middle, or High.
• D&N Delay: When day & night mode is set to Auto, the delay setting indicates how
quickly the camera switches between day and night mode. Select the D&N delay in
seconds.
IR Light
• Manual: Set custom IR light settings.
• ZoomPrio: IR lights automatically turn on in dark conditions. Zoom functions control
the amount of IR light emitted.
• SmartIR: IR lights automatically turn on in dark conditions.
• OFF: Turn off the IR light function.
Defog Mode (For select network cameras only): Select Auto to automatically im-
prove video quality in poor visibility conditions, example: fog. Select Manual to man-
ually configure the Defog mode settings. Select Off to disable this function.
#LX400073; r.46243/46243; en-US
and search for "Color Night Vision".
16