FLIR DND13TL2 Instruction Manual page 16

3 Live View
2. In the text box under the drop-down menu, enter the tour number you would like to add
between 1–8.
3. To add presets to the tour, click the Add button. Enter the preset value in the text box
that appears below the Add and Del button.
4. Click Add Preset. Repeat these steps to add multiple presets to the tour.
To start a tour:
1. Enter the tour number you would like to move the camera to between 1~8.
2. Click Start to begin the tour.
To delete a tour:
1. In the text box under the drop-down menu, enter the tour number you would like to
delete.
2. Click Del to remove the tour from the tour list.
3.1.2.4 Pattern
Use the Pattern function to record a series of camera movements to recall later.
To add a new pattern:
1. Select Pattern from the drop-down menu under PTZ Settings.
2. In the text box under the drop-down menu, enter the pattern number you would like to
add between 1–5. Click Add.
3. Click the Start Rec button and use the PTZ Controls to record a pattern.
4. Click the Stop Rec to stop recording.
To run a pattern:
1. Enter the pattern number you would like run.
2. Click Start to run the pattern.
To delete a pattern:
1. In the text box under the drop-down menu, enter the pattern number you would like to
delete.
2. Click Del to remove the pattern from the pattern list.
3.1.2.5 Assistant (Not Supported)
#LX400073; r.46243/46243; en-US
8