Pattern; Pan; Privacy Mask - FLIR DND13TL2 Instruction Manual

5 Setup
5. Move the camera to the rightmost point of the scan pattern you want to set and click
Set Right Limit.
6. Under Speed, click - / + or use the slider to set the speed of the scan cycle. Setting a
higher number means the camera will move faster between the left and right limits.
7. Click the Start button to test the scan cycle, then Stop to stop the test.

5.3.4 Pattern

You can use the pattern function to record a series of camera movements to recall later.
To save a pattern:
1. Under PTZ > Function, click Pattern.
2. Under Pattern No., select the pattern cycle you would like to configure.
3. Click Set.
4. Click Start Rec to start recording a pattern. Move the camera in the desired pattern us-
ing the PTZ controls. When finished, click Stop Rec.
5. Click the Start button to test the pattern, then Stop to stop the test.

5.3.5 Pan

Set the camera to pan continuously at a set speed.
To setup auto-pan:
1. Under PTZ > Function, click Pan.
2. Under Pan Speed, click - / + or use the slider to set the panning speed.
3. Click the Start button to test the auto-pan, then Stop to stop the test.

5.3.6 Privacy Mask

Configure privacy masks to hide certain parts of the camera image in video recordings.
CAUTION
Privacy masks block out parts of the camera image entirely and appear as black boxes in recordings.
#LX400073; r.46243/46243; en-US
34