FLIR DND13TL2 Instruction Manual page 15

3 Live View
3.1.2.2 Preset
Use the Preset function to save preset camera positions to recall later.
To add presets:
1. Select Preset from the drop-down menu under PTZ Settings.
2. In the text box under the drop-down menu, enter the preset number you would like to
add.
3. Use the PTZ controls to move the camera to a desired location.
4. Click Add to add the current location to the list of presets. Repeat these steps to add
additional presets.
To go to a preset location:
1. Enter the preset number you would like to move the camera to.
2. Click Go to to move the camera to the preset location.
To delete a preset:
1. In the text box under the drop-down menu, enter the preset number you would like to
delete.
2. Click Del to remove the preset from the preset list.
3.1.2.3 Tour
Use the Tour function to automatically move the camera to several preset locations in a
cycle.
You must have preset positions configured to start a tour. To configure a tour with already
existing presets:
1. Select Tour from the drop-down menu under PTZ Settings.
#LX400073; r.46243/46243; en-US
7