Web Configuration Setup; Internet Explorer Setup - FLIR DND13TL2 Instruction Manual

2

Web Configuration Setup

The camera includes a built-in web interface that can be accessed using a web browser.
Microsoft Internet Explorer® 8.0 or later, 32-bit version (via ActiveX®) supports the built-
in web interface.
NOTE
Before accessing the web interface, you must know your camera's IP address. For instructions on how to
find your camera's IP address, refer to the Quick Networking Guide for your FLIR IP Camera or see 7.3
Adding a Camera over the Local Network (LAN), page 62.

2.1 Internet Explorer Setup

1. Open Internet Explorer® and enter the camera's IP address in the address bar in the
following format: http://IP address.
• For example: http://192.168.0.100
2. A notification bar may appear asking if you would like to install ActiveX® plugins. Click
Install or Allow to install the plugins.
3. Enter the camera user name (default: admin) and password (default: admin) and click
Login.
NOTE
If video from the camera does not appear after installation, quit Internet Explorer® by closing the
browser window. Then restart Internet Explorer® and log back into your camera.
#LX400073; r.46243/46243; en-US
2