Snapshot; Overlay - FLIR DND13TL2 Instruction Manual

5 Setup

5.1.5 Snapshot

The Snapshot tab allows you to configure image quality settings for snapshots.
To configure snapshots:
1. Configure the following:
• Snapshot Type: Select Continuous to configure snapshots taken during sched-
uled recording. Select Event to configure snapshots activated by alarms.
• Image Size: The image size of snapshots is the same as the resolution for the se-
lected stream.
• Quality: Select the image quality for snapshots between 1 (lowest) and 6 (highest).
• Interval: Select the interval between snapshots between 1 and 7 seconds or select
Customized and enter the interval in seconds.
2. Click Save to save changes.

5.1.6 Overlay

The Overlay tab allows you to configure the text and information that appears overtop of
the camera image, such as the time and date display.
To configure video overlay:
1. Under Channel Title, select Enable to show the name of the channel on screen.
Under Input channel title, enter a personalized channel name.
2. Under Time Title, select Enable to show the time on screen. Check the Week Dis-
play check box to show the day of the week.
#LX400073; r.46243/46243; en-US
20