Timestamp Class - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
Item
●
C++:
C:
h, int item) from Summary
Returns the value in the indicated position, inside the collection of values making up the
occupancy percentage ranges of a detector. The values are sorted from lowest to
highest, placing the smallest value at the first position in the collection.
The parameter "item" must specify the position (starting from zero).
If there is no OccupationsUpperLimit at the specified position, it returns an invalid one
(see IsValid from OccupationsUpperLimit class).

3.36. Timestamp Class

Definition of timestamp
3.36.1. Properties
Seconds
●
C++:
C:
is the class referenced by Timestamp.
Date and time of the timestamp, showing the seconds elapsed since 00:00 hours on the
first of January of 1970. It is the same format that is returned at the call to function
time_t time ( time_t *timer ) from ANSI C standard.
USeconds
●
C++:
C:
class is the class referenced by Timestamp.
Microsecond of the timestamp.
3.37. Notification Class
Logical representation of a unit's notification.
Quercus Technologies
int Item ( int item )
Does not exist, check VL_Summary_get_OccupationsUpperLimit_Item(int
int get_Seconds()
Does not exist, check class_get_Timestamp_Seconds(int h), where class
int get_USeconds()
Does not exist, check VL_class_get_Timestamp_USeconds(int h), where
81