Detectors Configuration File - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
[OSD]
parameter1=value1
.
.
There is an example available in the BirdWatch
Type/Data/Globals.ini"

7.1.2. Detectors configuration file

This file contains the configuration of the enabled detectors in the simulation. It corresponds to
the detectors configuration menu of a real BirdWatch
below refer to each parameter of the menu. See BirdWatch
information about it.
The file structure is fixed but parameters described maybe different depending on the
simulated detector. The file is divided into sections, defined between brackets, with their
parameters described below (one per line).
[Global]
NumDetectors=
NumTrafficLights=
[Detector1]
parameter1=value1
.
.
[Trafficlight1]
parameter1=value1
.
.
The first section (Globals) indicates the number of detectors and traffic lights to be described
in the file. The rest defines each of the detectors (Detector) and traffic lights (TrafficLight).
There is an example available in the BirdWatch
Type/Data/Detectors.ini"
7.1.2.1. Globals section
NumDetectors: number of defined detectors.
●
NumTrafficLights: number of defined traffic lights.
●
7.1.2.2. DetectorX section
Description of the detector; X indicates the detector identifier (from 1 to the total amount of
Quercus Technologies
205
® RL installation folder: "Simulation/Simulation
® RL unit, so the parameters described
RL user manual for detailed
®
® RL installation folder: "Simulation/Simulation