Realtimeinformation - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
TotalStoppedTime (TotalStoppedT): total amount of time while the vehicle is
●
stopped, previous time to the red light activation included; in milliseconds.

4.6.5. RealTimeInformation

Indicates that a real time event has been received. Depending of the type of generated event,
some fields are used and some others not. Fields not providing any information have a value of
"-1".
Type: 4
●
Message Data:
●
4
Type
DetectorId
DetectorId: identifier of the detector that generated the real time event.
●
DetectorType (Type): type of detector that generated the real time event:
●
1: speed detector.
○
2: queue detector.
○
3: presence detector.
○
4: red light detector.
○
5: stoppped car detector.
○
Timestamp: timestamp when the real time event was generated, using a
●
QuercusTimestamp structure.
Speed: approximated speed of the detected vehicle; in km/h. If speed
●
calculation was not possible, its value will be -1.
Length: approximated length of the detected vehicle; in millimetres. If length
●
calculation was not possible its value will be -1. Si no ha sido posible calcular la
longitud su valor será -1.
WrongWay (WW): true if the direction of the detected vehicle is incorrect, and
●
false if the direction is correct.
Occupation: occupancy percentage of the detector.
●
IsOccupied (IsOc): true if the detector reports vehicle presence, and false if free.
●
Field operational only in a presence detector.
Quercus Technologies
143
8
1
Timestamp
4 4
Speed Length
1
4
WW Occupation
IsOc
1