Configuration - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
7. BirdWatch
This chapter describes the BirdWatch
No physical BirdWatch
BirdWatch ® RL user manual to know the rest of the client software.
RLSimu can simulate the complete set of events generated by a real BirdWatch
Any number of units can be simulated, running as many instances of the program as desired.
It is possible to test a software designed to interact with a BirdWatch

7.1. Configuration

A couple of configuration files must be created:
General configuration file.
●
Detectors configuration file.
●
7.1.1. General configuration file
Contains the unit configuration.
This file corresponds to the configuration menu of a real BirdWatch
parameters described below refer to each parameter of the menu. See the BirdWatch
manual for detailed information about it.
The file structure is fixed but the parameters described may differ depending on the simulated
product. The file is divided into sections, defined between brackets, with their parameters
described below (one per line).
[Communications]
parameter1=value1
parameter2=value2
.
.
[Global]
parameter1=value1
.
.
[Engine]
parameter1=value1
.
.
[IO]
parameter1=value1
.
.
Quercus Technologies
204
RL Simulator (RLSimu)
®
® RL unit simulator, which is a part of the client software.
® RL units are required to follow the following steps described. See the
RL system.
®
® RL system.
® RL unit, so the
®
RL user