Red Light Incidence - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
</Range3>
</DistributionSpeed>
<DistributionLength>
<Number>3</Number>
<UnknownPercentage>2</UnknownPercentage>
<Range1>
</Range1>
<Range2>
</Range2>
<Range3>
</Range3>
</DistributionLength>
</Summary>

8.1.1.4. Red light incidence

The name of the XML file is <incidenceId>.xml , where "incidenceId" is the incidence
●
identifier left padded with zeros until reaching eight digits. The contents of the file is the
following:
Incidence: contains all data from the incidence.
●
Id: incidence identifier.
●
Type: type of incidence. RED_LIGHT_VIOLATION for a red light incidence.
●
Unit: unit identifier.
●
Detector: detector identifier.
●
Description(1,2,3,4): unit description labels; only defined description labels will
●
be shown.
DetectorType: type of detector; RED_LIGHT for a red light detector.
●
Images: information about the captured images:
●
Number: number of captured images.
●
●
Quercus Technologies
220
<InferiorLimit>100</InferiorLimit>
<SuperiorLimit>-1</SuperiorLimit>
<Percentage>53</Percentage>
<InferiorLimit>0</InferiorLimit>
<SuperiorLimit>6000</SuperiorLimit>
<Percentage>67</Percentage>
<InferiorLimit>6000</InferiorLimit>
<SuperiorLimit>10000</SuperiorLimit>
<Percentage>22</Percentage>
<InferiorLimit>10000</InferiorLimit>
<SuperiorLimit>-1</SuperiorLimit>
<Percentage>9</Percentage>
ImageX: image <X>, where X is the image identifier.
FileName: image file name.
●
TimeStamp: timestamp when the image was captured.
●
Seconds: showed in seconds since 00:00h on 01-01-1970.
●
USecons: microseconds past the second Seconds (previous field).
●
For a better timestamp accuracy.
Date: date showed with format yyyy-mm-dd (year-month-day).
●