Configurationoutputactuatorconditions Class - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
Release
●
C++:
C:
See 2.2.1. Memory management.

3.46. ConfigurationOutputActuatorConditions class

Colecction of output actuator conditions in an output actuator.
3.46.1. Methods
Count
●
C++:
C:
VL_ConfigurationOutputActuator_get_Conditions_Count ( ) from
ConfigurationOutputActuator.
Number of configured conditions.
Item
●
C++:
C:
VL_ConfigurationOutputActuator_get_Conditions_Item
ConfigurationOutputActuator.
Returns the condition in the specified position inside the conditions collection of the
output actuator.
If there is no ConfigurationOutputActuatorCondition for the specified position, returns
an invalid one (see IsValid from ConfigurationOutputActuatorCondition class).
The parameter "item" must specify the position (starting from zero).
Create
●
C++:
value )
C:
VL_ConfigurationOutputActuator_get_Condition_Create
ConfigurationOutputActuator.
Quercus Technologies
110
Does not exist
void VL_ConfigurationOutputActuator_Release ( int h )
int Count ( )
Does not exist, check
ConfigurationOutputActuatorCondition Item ( int item )
Does not
bool Create ( int detectorId, VLFieldType field, VLOperatorType op, int
Does not
exist,
( )
exist,
( )
check
from
check
from