Stoppedcardetector - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
no amber signal will be used) its value will be -1.
IsVideoEnabled (isVE): true if video generation in the incidences is enabled, false
●
otherwise.
PreVideoTimeMs (PreVideoT): time that the start of video capturing will be
●
advanced since the first picture; in miliseconds.
PostVideoTimeMs (PostVideoT): time that the stop of video capturing will be
●
delayed since the third picture; in miliseconds.
LastPictureDelayTimeMs (LastPictureD.): time that the last picture of the
●
incidence will be delayed; in miliseconds.

4.5.10. StoppedCarDetector

Describes a stopped car detector.
The structure corresponds to the version 3. Check 5. Communications protocol (old versions)
to see the older versions.
32
Header
4
PreVideoT
Header (Head): description of the common features of the detectors using a
●
DetectorHeader .
MaxStopTime: minimum stop time with the traffic light on red, in order to
●
generate an incidence; in miliseconds.
Loop: description of the coordinates (in the 5 megapixel image) of the only loop
●
of the detector, using a Region structure.
TrafficLightId: identifier of the traffic light used as a stop signal. If no traffic light
●
is configured, but a digital input, its value will be -1.
RedInput: identifier of the digital input used as a stop signal. If no digital input
●
is configured, but a traffic light, its value will be -1.
IsVideoEnabled (isVE): true if video generation at the incidences is enabled,
●
false otherwise.
PreVideoTimeMs (PreVideoT): time that the start of video recording will be
●
advanced since the first picture; in miliseconds.
PostVideoTimeMs (PostVideoT): time that the stop of video recording will be
●
Quercus Technologies
137
4
MaxStopTime Loop
4
PostVideoT
16
4
Distance
4 1
IsVE
RedInput