Configuration - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
6. Simulator SmartLoop
This chapter describes the SmartLoop
No physical SmartLoop
SmartLoop ® TS user manual to know the rest of the client software.
TSSimu can simulate the complete set of events generated by a real SmartLoop
Any number of units can be simulated, running as many instances of the program as desired.
It is possible to test a software designed to interact with a SmartLoop

6.1. Configuration

A couple of configuration files must be created:
General configuration file.
●
Detectors configuration file.
●
6.1.1. General configuration file
Contains the unit configuration.
This file corresponds to the configuration menu of a real SmartLoop
parameters described below refer to each parameter of the menu. See the SmartLoop
manual for detailed information about it.
The file structure is fixed but the parameters described may differ depending on the simulated
product. The file is divided into sections, defined between brackets, with their parameters
described below (one per line).
[Communications]
parameter1=value1
parameter2=value2
.
.
[Global]
parameter1=value1
.
.
[Engine]
parameter1=value1
.
.
[IO]
parameter1=value1
.
.
Quercus Technologies
197
® TS unit simulator, which is a part of the client software.
® TS units are required to follow the following steps described. See the
TS (TSSimu)
®
TS system.
®
® TS system.
® TS unit, so the
TS user
®