Stoppedcardetector - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
Version 0:
Header
Loop1
The fields "AmbertInput", "IsVideoEnabled", "PreVideoTimeMs" and "PostVideoTimeMs" don't
exist. The field "Input" corresponds to "RedInput" of version 1. The coordinates of the detector
("Header/Coordinates") and the loops ("Loop1" y "Loop2") are defined in the 0.3 megapixel
image. The rest of fields have the same meaning of version 1.

5.1.8. StoppedCarDetector

Version 1 and 2 (are the same):
87
Header
4
PreVideoT
Header (Head): description of the common features of the detectors using a
●
DetectorHeader of verision 0.
MaxStopTime: minimum stop time with the traffic light on red, in order to
●
generate an incidence; in miliseconds.
Loop: description of the coordinates (in the 5 megapixel image) of the only loop
●
of the detector, using a Region structure.
TrafficLightId: identifier of the traffic light used as a stop signal. If no traffic light
●
is configured, but a digital input, its value will be -1.
RedInput: identifier of the digital input used as a stop signal. If no digital input
●
is configured, but a traffic light, its value will be -1.
IsVideoEnabled (isVE): true if video generation at the incidences is enabled,
●
false otherwise.
PreVideoTimeMs (PreVideoT): time that the start of video recording will be
●
advanced since the first picture; in miliseconds.
Quercus Technologies
191
87
1
Calc
16
Loop2
4
MaxStopTime Loop
4
PostVideoT
4 4
Distance Length
16
4
TrafficLightId
16
Distance
4
DelayTime
4
Input
4 4
RedInput
1
IsVE