Speedsupperlimit Class - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
C:
VL_Summary_get_OccupationsDistribution_Item(int h, int item) de Summary
Returns the percentage in the indicated position within the collection of time
percentages for a given occupancy range. The location of each time percentage in the
collection,
OccupationsUpperLimit of the detector.
The parameter "item" must specify the position (starting from zero).
If there is no OccupationsDistribution at the specified position, it returns an invalid one
(see IsValid from OccupationsDistribution class).

3.33. SpeedsUpperLimit Class

Collection of values making up the speed ranges of a detector. For deeper information about
speed distribution, see SmartLoop
3.33.1. Properties
Count
●
C++:
C:
de Summary
Number of values in the collection.
Item
●
C++:
C:
int item) from Summary
Returns the value in the indicated position, inside the collection of values making up the
speed ranges of a detector. The values are sorted from lowest to highest, placing the
smallest value at the first position in the collection.
The parameter "item" must specify the position (starting from zero).
If there is no SpeedsUpperLimit at the specified position, it returns an invalid one (see
IsValid from SpeedsUpperLimit class).
Quercus Technologies
Does
corresponds with
® user manual.
int Count ( )
Does not exist, check VL_Summary_get_SpeedsUpperLimit_Count(int h)
int Item ( int item )
Does not exist, check VL_Summary_get_SpeedsUpperLimit_Item(int h,
not
the order of
exist,
ranges in the
check
collection
79