Removedetector - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
Answer
Type: 184
●
Message Data:
●
DetectorsCount (DetCount): number of detectors in the configuration system.
●

4.9.23. RemoveDetector

Removes a detector from the configuration system.
Query
Type: 161
●
Message Data:
●
SessionId: session identifier obtained at the last valid "Login".
●
Index: position of the detector in the detector's collection of the configuration
●
system (starting from zero).
DetectorId: identifier of the detector.
●
Only one of the two parameters can be used to specify a detector (Index or
DetectorId); the parameter not used must be set to -1.
Answer
ACK/NAK
4.9.24. GetDetector
Obtains information about a detector.
The structures correspond to the version 3. Check 5. Communications protocol (old versions)
to see the older versions.
Quercus Technologies
172
4
DetCount
4 4
SessionId Index
4
DetectorId