quercus SmartLoop TS Programming Manual page 221

QuercusVL Programming Manual
Video: information about the video geneated (if video generation is enabled).
●
Filename: file name of the video recording.
●
InitTimestamp: time stamp of the start of the video capturing.
●
●
●
●
●
EndTimestamp: time stamp of the stop of the video capturing.
●
●
●
●
●
Duration: video duration; in miliseconds.
●
Width: width of image in the video; in pixels.Incidence: contains all data
●
from the incidence
Height: height of the image in the video; in pixels.
●
Framerate: frames per second of the video file.
●
Speed: approximated speed of the vehicle that generated the incidence; in
●
kilometres per hour. If speed calculation was not possible, the value will be -1.
ElapsedTime: time elapsed since the traffic light went red until the incidence
●
generation; in milliseconds.
AmberLightTime: time spent with amber light active, before turned to red and
●
generated the incidence; in miliseconds.
DelayTime: minimum time elapsed since the red light activation to the creation
●
of the incidence for this to be considered as valid; in milliseconds. User
configured.
<?xml version="1.0" encoding="UTF-8"?>
<Incidence>
<Id>3</Id>
<Type>RED_LIGHT_VIOLATION</Type>
<Unit>1</Unit>
Quercus Technologies
221
Time: time
●
(hours:minutes:seconds:microseconds).
Seconds: showed in seconds since 00:00h of 01-01-1970.
USecons: microseconds since the second Seconds (previous field). For
better accuracy.
Date: date formatted as yyyy-mm-dd (year-month-day).
Time: time
(hours:minutes:seconds:microseconds).
Seconds: showed in seconds since 00:00h of 01-01-1970.
USecons: microseconds since the second Seconds (previous field). For
better accuracy.
Date: date formatted as yyy-mm-dd (year-month-day).
Time: time
(hours:minutes:seconds:microseconds).
showed with
formatted
formatted
format hh:mm:ss.us
as hh:mm:ss.us
as hh:mm:ss.us